1) LTE connectivity module(CM100GLTE)
To stay connected to the BlackVue Cloud over cellular data network, you can install an external connectivity module such as BlackVue Connectivity Module (CM100GLTE).
Note
* You must subscribe to your recommended local network carrier for LTE services.
* You must subscribe to BlackVue Cloud services.
* BlackVue Connectivity Module (CM100GLTE) may not be supported in some countries. Please refer to the BlackVue website for availability.
2) CPL Filter (CPL-2)
The BlackVue CPL Filter helps reduce glare, enhance colors, and improve
image clarity for cleaner, sharper video. It’s especially effective in bright
conditions, making it a highly recommended accessory.
Note
* Mount the CPL filter at the optimal position for the clearest image, and install it as instructed in the user manual.
* In low-light conditions such as nighttime or tunnels, the video may appear darker. Remove the filter if necessary.
* Clean the filter regularly to prevent dust or smudges.
* Ensure the filter is securely fixed to prevent it from shifting due to vehicle vibration.
* The CPL filter’s effectiveness may vary depending on the type of windshield, such as tinted or specialized glass.
* For more detailed information about the products, please refer to the link below.
3)Tamper Proof Case (TP-E)
The BlackVue Tamper-Proof Case TP-E physically secures the dashcam to prevent unauthorized removal, SD card access, or angle adjustment, ideal for fleet and high-security vehicle use.
Note
* Confirm the camera angle before locking the case, as it cannot be adjusted afterward without removal.
* Always tighten the lock (hex screw or key lock) fully to ensure effective tamper prevention.
* Never try to open or adjust the case without the proper tool; it can damage the device.
* Store the hex wrench or key securely, as losing it may make accessing the camera or SD card difficult.
* The tamper proof case TP-E is compatible with ELITE 8 only.
* For more detailed information about the products, please refer to the link below.
ELITE 8 Tamper Proof TP-E Manual
4) Parking mode battery (Power Magic Battery B-112,Ultra battery B-130A)
Parking Mode is supported when using a hardwiring power cable or a dedicated
parking mode battery (e.g.,Power Ultra Battery or Power Magic Battery Pack).
If you want to record video while the engine is off without using the vehicle’s battery,
Please install a parking mode battery.
Power Magic Battery B-112
The Power Magic Battery pack B-112 powers a single dashcam for up to 12 hours after 1 hour of rapid charging. When the engine is off the battery pack powers the dashcam. When the engine is on the dashcam is powered directly from the vehicle’s battery and the battery pack charges.
Ultra Battery B-130A
The Ultra battery is a high-capacity battery that powers your dashcam in Parking Mode while protecting your vehicle’s battery. It changes quickly, lasts up to 30 hours, and offers safe, stable performance with LIFePO4 cells. Easy to install and compatible with the BlackVue App and Cloud, it’s a smart and reliable power solution for vehicles.
Note
* Ultra Battery recharges with ignition on and powers your dashcam when ignition it off.
* For more detailed information , Please check Blackvue homepage(www.blackvue.com).
* For more detailed information about the products, please refer to the link below.
