---
title: Installation
description: "- **BlackVue Mount installation Guide.** ### A. For customers replacing only the mount on an existing vehicle. **Step 1. Disconnect the Dash Cam and Cables** - Disconnect all power, GPS, and video cables from the front and rear cameras.   …"
url: "https://manual.blackvue.com/docs/mountkit/installation-mount-kit/installation-3/"
updated: "2025-07-09"
category: Installation
---

# Installation

- **BlackVue Mount installation Guide.**

### A. For customers replacing only the mount on an existing vehicle.

**Step 1. Disconnect the Dash Cam and Cables**

- Disconnect all power, GPS, and video cables from the front and rear cameras.         

**Step 2. Remove the Existing Mount**

- First, remove the camera body from the mount.

![](https://manual.blackvue.com/wp-content/uploads/2025/06/본체를-윈실드서-떼어내기-.png)

- Spray water or alcohol around the mount continuously to weaken the adhesive, then gently shake and remove it.

![](https://manual.blackvue.com/wp-content/uploads/2025/06/윈실드에-붙여있는-마운트-떼기-.png)

- Use the same method to remove the rear camera mount.

**Step 3. Reattach to the Vehicle**

- Attach the new mount to the center of the windshield, align it horizontally, and press to secure it.
  (Follow the same procedure for the rear camera.) 

![](https://manual.blackvue.com/wp-content/uploads/2025/06/신규-마운트-윈실드-부착-하기-.png)

 

**Step 4. Install the New Mount and Dashcamera **

- Attach the front and rear cameras (removed in Step 2) to the provided mount.
- After securing the mount, leave it untouched for more than 12 hours before attaching the camera body to the mount.

![](https://manual.blackvue.com/wp-content/uploads/2025/06/본체-다시-신규마운트에-껴넣기-.png)

 

**Step 5. Organize and Test**

- Use the included removal tool and cable clips to organize the wiring.

   ![](https://manual.blackvue.com/wp-content/uploads/2025/06/프라이툴로-선정리-.png)  ![](https://manual.blackvue.com/wp-content/uploads/2025/06/케이블-클립으로-선-정리-.png)

- Clean the lenses and adjust the camera angle as shown in the image below to achieve the optimal recording position.
- If necessary, check Wi-Fi connectivity and GPS reception.

![](https://manual.blackvue.com/wp-content/uploads/2025/05/9.png)     ![](https://manual.blackvue.com/wp-content/uploads/2025/05/10.png)

**                       Front Camera   **                                               **Rear Camera **

 

 

### B. For Customers Installing an Additional Mount on a Second or New Vehicle

**Step 1. Select the Installation Position on the New Vehicle**

- Determine the mounting positions for the front and rear cameras.
- It is generally recommended to install the cameras at the center of the windshield, within the wiper coverage area.

**Step 2. Install the New Mount**

- Attach the included new mount to the center of the windshield, within the wiper coverage area.

- Before attaching, clean the glass thoroughly and wait for it to dry completely. After attaching, leave it for 12 hours to ensure strong adhesion.

![](https://manual.blackvue.com/wp-content/uploads/2025/06/신규-마운트-윈실드-부착-하기-.png)

 

 

**Step 3. Attach the Existing Camera**

- Mount the previously used camera body onto the newly installed mount.

![](https://manual.blackvue.com/wp-content/uploads/2025/06/본체-다시-신규마운트에-껴넣기-.png)

 

**Step 4. Organize the Cables**

- Use the included removal tool and cable clips to neatly arrange the wiring.

![](https://manual.blackvue.com/wp-content/uploads/2025/06/프라이툴로-선정리-.png)      ![](https://manual.blackvue.com/wp-content/uploads/2025/06/케이블-클립으로-선-정리-.png)

**Step 5. Test and Finalize the Setup**

- Clean the camera lens and adjust the camera angle as shown in the image below for optimal recording positioning.
- If necessary, check the Wi-Fi connection and GPS reception.

![](https://manual.blackvue.com/wp-content/uploads/2025/05/9.png)          ![](https://manual.blackvue.com/wp-content/uploads/2025/05/10.png)

**                       Front Camera**                                                                  **Rear Camera **

 

###

*** For customers using the Box series, please refer to the information below for the mount assembly instructions.**

Detach the tamperproof bracket from the front camera by rotating the screw counterclockwise with the allen wrench.

      ![](https://manual.blackvue.com/wp-content/uploads/2023/02/6-1.png) After installing the mount with an Allen wrench, please verify how to install the mount kit above it.

### ⚠️ Precautions Before Installation

- Be sure to remove any debris or foreign substances from the windshield surface before attaching the mount.
- It is recommended to wait at least 12 hours after attaching the mount before driving, to allow the adhesive to stabilize.
- Forcing the camera body in or out may damage the mounting area. Handle with care.