---
title: Important Safety Information(Cable)
description: "For user safety and to avoid property damage, read through this manual and follow these safety instructions to use the product correctly. **![](https://manual.blackvue.com/wp-content/uploads/2020/11/DANGER.svg) DANGER****Failure to observe the following directions could result in death or property damage** - Do not disassemble,…"
url: "https://manual.blackvue.com/docs/hardwire-kit/safety-information/important-safety-informationcable/"
updated: "2025-08-07"
category: Important Safety Information
---

# Important Safety Information(Cable)

For user safety and to avoid property damage, read through this manual and follow these safety instructions to use the product correctly.

**![](https://manual.blackvue.com/wp-content/uploads/2020/11/DANGER.svg) DANGER****Failure to observe the following directions could result in death or property damage**

- Do not disassemble, repair, or modify the product yourself.
   Doing so may cause fire, electric shock, or malfunction. For internal inspection and repair, contact the service center.
- If any foreign matter gets inside the product, detach the power cord immediately.
   Contact the service center for repair.
- Do not adjust the product while driving.
   Doing so may cause an accident. Stop or park your car in a safe place before installing and setting up the product.
- Do not install the product in a location where the product can interfere with the driver’s field of vision.
   Doing so may cause an accident.
- Do not use a damaged or modified power cord. Only use the cords provided by the manufacturer.
   Damaged or modified power cords may cause an explosion, fire, or malfunction.
- Do not operate the product with wet hands.
   Doing so may cause electric shock.
- Do not install the product in an environment with high humidity, or combustible gases or liquids.
   Doing so may cause an explosion and/or fire.

**![](https://manual.blackvue.com/wp-content/uploads/2020/11/WARNING.svg) WARNING Failure to observe the following directions could result in death or serious injury**

- Do not leave the product near infants, children, or pets.
   There is a risk of them swallowing small components, and/or their saliva may get into the product, causing an explosion due to a short circuit.
- Do not spray water or wax directly onto the product while cleaning the inside of the car.
   Doing so may cause fire, electric shock, or malfunction.
- If smoke or an unusual smell is emitted from the power cord, detach the power cord immediately.
   Contact the service center or your distributor.
- Keep the terminals of the power cord clean.
   Failure to do so may cause excessive heat and fire.
- Use the correct input voltage.
   Failure to do so may cause explosion, fire, or malfunction.
- Plug in the power cord firmly so that it cannot easily be disconnected.
   Failure to do so may cause fire.
- Do not cover the product with any material.
   Doing so may cause external deformation of the product or fire. Use the product and peripherals in a well-ventilated location.