---
title: Product Layout
description: "The following diagrams explain each part of the BlackVue dashcam.   ## **Front camera** ![](https://manual.blackvue.com/wp-content/uploads/2024/01/25-300x226.png) **A)**Lock button **B)** Mounting bracket **C)**Front security LED: **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-5.svg)**: Lights on during (i) normal mode, (ii) an event is being recorded (impact detected), (iii) manual…"
url: "https://manual.blackvue.com/docs/dr970x-plus-series-ii/product-overview/product-layout-3/"
updated: "2025-07-15"
category: 3. Product Overview
---

# Product Layout

The following diagrams explain each part of the BlackVue dashcam.

 

## **Front camera**

![](https://manual.blackvue.com/wp-content/uploads/2024/01/25-300x226.png)

**A)**Lock button
 **B)** Mounting bracket
 **C)**Front security LED:
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-5.svg)**: Lights on during (i) normal mode, (ii) an event is being recorded (impact detected), (iii) manual recording has started, or (iv) motion is detected in parking mode.
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-6.svg)** : Blinks slowly during parking mode motion detection standby.
 **D)**  Camera lens

![](https://manual.blackvue.com/wp-content/uploads/2024/01/후면샷-1-300x300.jpg)

****A)****GPS LED

![led.blue.icon](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-1.svg) : Lights blue when GPS is on.
 ![led.blue-fast-blinking.icon](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-3.svg) : Blinks blue quickly when GPS is turning off.

**B)** Recording LED:
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-8.svg)** : Lights orange in normal mode.
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-9.svg)** : Lights red when (i) an event is being recorded (impact detected), or (ii) manual recording has started.
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-10.svg) **: Lights green in parking mode when motion is detected.

**C) B/W/L (**Bluetooth/ Wi-Fi/ LTE  LED):
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-4.svg) **: Lights yellow when LTE is connected.
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-5.svg)** : Lights white when Wi-Fi is connected.
 **[![](https://manual.blackvue.com/wp-content/uploads/2021/09/LED-Yellow_1.svg)](https://manual.blackvue.com/wp-content/uploads/2021/09/LED-Yellow_1.svg)** : Blinks Yellow slowly when Bluetooth is paired.
 **[![](https://manual.blackvue.com/wp-content/uploads/2021/09/LED-Yellow_2.svg)](https://manual.blackvue.com/wp-content/uploads/2021/09/LED-Yellow_2.svg)** : Blinks Yellow quickly when Bluetooth is in pairing mode.

**D)**Speaker

![](https://manual.blackvue.com/wp-content/uploads/2024/01/30.png)

**A)** Touch Sensor
 Press the sensor to trigger a manual recording.

*Touch sensor can be turned on/off in the firmware settings.

![](https://manual.blackvue.com/wp-content/uploads/2024/01/31-300x292.png)

** ****A)** Rear camera connection port
 ** B)** Micro USB port
 ** C)**DC in (power connector)
 ** D)**MicroSD card slot

** E)**Format button: Press and hold for 5 seconds, and after a beep, release the button.

Then, press again and hold for 5 seconds and release the button after a beep to format the microSD card.

** F)**Cover

## **Removing and inserting the front camera**

![](https://manual.blackvue.com/wp-content/uploads/2024/01/32-300x262.png)

**A)** Connectivity details label: Default Wi-Fi SSID / Default Wi-Fi password  / QR code
 **B)**Serial number label
 **•**To remove the dashcam from its bracket, press the LOCK button and pull the dashcam out of the mounting bracket.
 **•** To insert the dashcam into its bracket, push the dashcam into the mounting bracket until it "clicks" in.

## **Rear camera **

![x-series-rear-camera-views-drawing](https://manual.blackvue.com/wp-content/uploads/2020/10/x-series-rear-camera-views-drawing-e1606208823958-300x204.png)

**A)** Mounting bracket
 **B)**Camera lens

![](https://manual.blackvue.com/wp-content/uploads/2023/02/화면-캡처-2023-02-23-104020-300x176.png)

**A)**V out (Front camera connection port)
 **B)**Rear security LED
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-5.svg) :**Stays on in all recordings modes but can be turned off from firmware settings.

##

## **Removing and inserting the rear camera **

 

![x-series-rear-camera-mount-separation-drawing](https://manual.blackvue.com/wp-content/uploads/2020/10/x-series-rear-camera-mount-separation-drawing.png)

 

**•**To remove the rear camera from its bracket, hold the mounting bracket and pull the rear camera out.
 **•** To insert the rear camera into its bracket, push the rear camera into the mounting bracket until it "clicks" in.