---
title: "At a glance – DR900X-1CH"
description: "The following diagrams explain each part of the BlackVue dashcam. ## **Front camera** ![dr900x-1ch-front-side-image](https://manual.blackvue.com/wp-content/uploads/2020/11/Capture-17-300x201.png) **A)**Lock button **B)** Mounting bracket **C)**Front security LED: **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-5.svg)**: Lights on during (i) normal mode, (ii) an event is being recorded (impact detected), (iii) manual recording…"
url: "https://manual.blackvue.com/docs/dr900x-1ch/overview/at-a-glance-dr900x-1ch/"
updated: "2021-09-27"
category: Overview
---

# At a glance – DR900X-1CH

The following diagrams explain each part of the BlackVue dashcam.

## **Front camera**

![dr900x-1ch-front-side-image](https://manual.blackvue.com/wp-content/uploads/2020/11/Capture-17-300x201.png)

**A)**Lock button
 **B)** Mounting bracket
 **C)**Front security LED:
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-5.svg)**: Lights on during (i) normal mode, (ii) an event is being recorded (impact detected), (iii) manual recording has started, or (iv) motion is detected in parking mode
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-6.svg)** : Blinks slowly during parking mode motion detection standby
 **D)**  Camera lens

![dr900x-rear-side-image](https://manual.blackvue.com/wp-content/uploads/2020/11/Capture-18-300x192.png)

**A)**GPS/BT LED:
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-1.svg)**: Lights blue when GPS is on.
 **B)** Speaker
 **C)**Recording LED:
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-8.svg)** : Lights orange in normal mode.
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-9.svg)** : Lights red when (i) an event is being recorded (impact detected), or (ii) manual recording has started.
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-10.svg) **: Lights green in parking mode when motion is detected.
 **D)**LTE/Wi-Fi LED:
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-4.svg) **: Lights yellow when LTE is connected.
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-5.svg)** : Lights white when Wi-Fi is connected.
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-6.svg)** : Blinks white slowly when connecting to Wi-Fi.
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-7.svg)** : Blinks white quickly when Wi-Fi is turning off.

![](https://manual.blackvue.com/wp-content/uploads/2020/11/20201113-DR900X-1CH-illustration-002-300x206.png)

**A)**Proximity Sensor LED:
 **![](https://manual.blackvue.com/wp-content/uploads/2020/11/자산-5.svg) :**Lights when proximity sensor is triggered.
 **B)** Proximity Sensor:
 Touch or wave a finger within 20mm of the sensor to trigger a customizable function.
 **•**Available options:
 - Turn on/off audio recording (default)
 - Manual recording trigger
 - Off
 ![dr900x-button-image](https://manual.blackvue.com/wp-content/uploads/2020/11/Capture-20-300x242.png)

**A)**Micro USB port
 **B)**DC in (power connector)
 **C)**microSD card slot
 **D)** Wi-Fi button: Press once to turn on/off Wi-Fi.

## **Removing and inserting the front camera**

![dr900x-label-detail-image](https://manual.blackvue.com/wp-content/uploads/2020/11/Capture-21-300x180.png)

**A)** Connectivity details label:
 **•**Default Wi-Fi SSID
 **•**Default Wi-Fi password
 **•**Cloud code
 **•** QR code
 **B)**Serial number label

**•**To remove the dashcam from its bracket, press the LOCK button and pull the dashcam out of the mounting bracket.
 **•** To insert the dashcam into its bracket, push the dashcam into the mounting bracket until it "clicks" in.